與傳統施工方法相比，就地冷再生技術具有諸多優點，概括起來可歸納為以下6點：

Compared with traditional construction methods, in-situ cold regeneration technology has many advantages, which can be summarized as the following 6 points:

1.成本低

1. Low cost

道路就地冷再生機由于全部利用了舊的路面鋪層材料，從而減少了道路維修或改造時舊鋪層材料的開挖、運輸、廢置和新材料的購置，從而導致成本大幅度下降。采用道路就地冷再生比傳統方式相比，隨著再生層厚度的不同，可以降低成本，冷再生路面厚度越厚，降低成本越多。

Due to the full use of the old pavement paving materials, the road in-situ cold recycling machine reduces the excavation, transportation, disposal of the old paving materials and the purchase of new materials during road maintenance or reconstruction, resulting in a significant reduction in costs. Compared with the traditional method, the cost can be reduced with the different thickness of the regeneration layer. The thicker the cold regeneration pavement is, the more the cost will be reduced.

2.效率高

2. High efficiency

道路就地冷再生機械施工一次性可以完成銑刨、破碎、添加、拌和及攤鋪，從而簡化了施工程序，縮短施工工期。使用就地冷再生機械，每天施工可完成的工作量。

The construction of road in-situ cold recycling machinery can complete milling, crushing, adding, mixing and paving at one time, which simplifies the construction procedure and shortens the construction period. Using local cold regeneration machinery, the daily construction can complete the workload of square meters.

3.受天氣條件影響小

3. Little affected by weather conditions

舊地冷再生能夠在天氣環境不確定的條件下施工，除了在降雨量較大時，一般的陰晴不定的天氣，小雨天氣，冷再生機均可施工，即使在大雨過后，也可馬上恢復施工。

The old land cold regeneration machine can be constructed under the condition of uncertain weather environment. Except in the case of heavy rainfall, the cold regeneration machine can be constructed in general cloudy and sunny weather, light rain weather, and even after heavy rain, the construction can be resumed immediately.

4.對公共交通影響顯著減少

4. Significantly reduce the impact on public transport

冷再生工藝施工的特點是冷再生工序簡單，施工設施少，對交通干擾反映不敏感整個冷再生機械組合可以處于同一條車道內，不影響另一條車道車輛通行，可進行開放式施工，特別適用于交通量較大或路寬較窄情況下的道路的施工。

The characteristics of cold regeneration process construction are that the cold regeneration process is simple, the construction facilities are few, and it is insensitive to traffic interference. The whole cold regeneration machinery combination can be in the same lane, which does not affect the traffic of another lane. It can carry out open construction, especially suitable for the construction of roads with large traffic volume or narrow road width.

5.施工質量好

5. Good construction quality

就地冷再生可以根據不同道路舊鋪層材料的實際情況進行設計，選擇不同的添加劑，配比準確，可以保證再生材料的品質和施工質量，形成施工成型厚而均勻的粘結層，從而保證了維修后道路的使用期限。

The in-situ cold recycling can be designed according to the actual situation of the old paving materials of different roads. Different additives are selected and the proportion is accurate, which can ensure the excellent quality and construction quality of the recycled materials and form a thick and uniform bonding layer formed during construction, so as to ensure the service life of the road after maintenance.

6.具有優勢

6. Environmental protection advantages

冷再生機出租廠家認為使用傳統的道路維修方法，瀝青路面廢棄量十分巨大，對環境造成污染，大量新材料的開采，也會造成資源減少和環境的破壞，采用冷再生施工工藝，不需處理另外處理廢棄料，可完全避免上述問題。它不僅可以節約大量投資，更有利于環境保護，因此被人們稱之為“綠色”施工技術。

The rental manufacturer of cold recycling machine believes that using the traditional road maintenance method, the waste of asphalt pavement is very huge, which will cause pollution to the environment. The exploitation of a large number of new materials will also cause resource reduction and environmental damage. The above problems can be completely avoided by adopting the cold recycling construction process without dealing with other waste materials. It can not only save a lot of investment, but also be more conducive to environmental protection, so it is called "green" construction technology.

冷再生施工工藝的優越性，以及其產生的巨大的社會效益和經濟效益，必將會使路面冷再生機得到越來越廣泛的應用，所以如果您有購買需求就來我們網站http://www.mshjwlk.com先做咨詢吧。

The advantages of the cold recycling construction process, as well as the huge social and economic benefits it produces, will make the road surface cold recycling machine more and more widely used, so if you have a purchase demand, please come to our website http://www.mshjwlk.com Consult first.