雙鋼輪壓路機現在已經作為道路施工工程以及機械建設工程當中必不可少的一種機械工具。它方便了人們施工作業的效率及方便性。今天冷再生機租賃廠家為大家介紹下使用壓路機的技巧介紹：

Double steel wheel roller has become an indispensable mechanical tool in road construction engineering and machinery construction engineering. It facilitates the efficiency and convenience of people's construction. Today, the cold regenerator rental manufacturer introduces the skills of using the roller:

雙鋼輪膠輪壓路機操作規程：

Operating procedures for double steel wheel rubber tyred roller:

A、碾壓遵循的原則

A. Principles for rolling

a、少量噴水，保持高溫慢速，梯形重，分段碾壓。

a. Spray a small amount of water, keep high temperature and slow speed, trapezoid weight, and roll in sections.

b、由路外側（低側）向分隔帶方面碾壓。

b. Rolling from the outside of the road (low side) to the central divider.

c、每個碾道與相鄰碾道重1/2輪寬。

c. Each roller track and the adjacent roller track weigh 1 / 2 wheel width.

d、壓路機不得在未壓完或剛壓完的路面上急剎車、急彎、調頭、轉向、換擋、嚴禁在未壓完的瀝青層上停機。

d. The road roller shall not brake, bend, turn around, turn, shift gears on the road surface that has not been compacted or has just been compacted. It is strictly prohibited to stop on the asphalt layer that has not been compacted.

e、振動壓路機用振動壓實，需停駛、前進或后返時，應先停振，再換擋。

e. The vibratory roller is used for vibration compaction. When it needs to stop, move forward or return, the vibration shall be stopped first and then the gear shall be changed.

B、碾壓程序

B. Rolling procedure

瀝青混合料各層的碾壓成型分為初壓、復壓、終壓三個階段。

The rolling forming of each layer of asphalt mixture is divided into three stages: initial compaction, re compaction and final compaction.

a、初壓。鋼輪靜壓1遍主要為了增加瀝青混合料的初始密度起穩定作用。

a. Initial pressure. The static pressure of steel wheel once is mainly used to increase the initial density of asphalt mixture and play a stabilizing role.

b、復壓。AC料鋼輪振動壓4遍，膠輪壓4遍主要解決壓實問題。SMA料鋼輪振動6遍，以壓實為準表面有云點點。

b. Re pressing. The AC material is vibrated by steel wheel for 4 times and rubber wheel for 4 times to solve the compaction problem. The steel wheel of SMA material shall be vibrated for 6 times, subject to compaction, and there are cloud spots on the surface.

c、終壓。鋼輪靜壓2遍主要是壓實中產生的輪跡，使表面平整度達到或超過要求值，碾壓終了溫度應不低于70℃。

c. Final pressure. The static pressing of steel wheel for two times is mainly to eliminate the wheel marks generated during compaction, so that the surface flatness reaches or exceeds the required value. The temperature at the end of rolling shall not be lower than 70 ℃.

d、瀝青路面邊緣壓實時應先留下30cm左右不壓，待兩個壓實階段完成后再壓，并多壓1～2遍，靠路緣石處壓路機壓不到時，用振動夯補壓。

d. When the asphalt pavement edge is compacted, about 30cm shall be left without compaction. After the two compaction stages are completed, it shall be compacted for 1-2 more times. When the roller near the curb is unable to compact, it shall be compacted by vibrating rammer.

在操作雙鋼輪壓路機之前，一定要仔細的閱讀機械說明書，大致的了解下說明書對機器的簡要說明，這樣可以讓作業人員對其有一定的了解，也方便了作業人員對其上手的程度，明確建設目標和目標方向的生產建設。

Before operating the double steel wheel roller, it is necessary to carefully read the machine manual and roughly understand the brief description of the machine in the manual, so that the operators can have a certain understanding of the machine, and also facilitate the operators to understand the level of its operation, and clarify the construction objectives and the production construction in the target direction.

其次，為了充分的發揮雙鋼輪壓路機的工作性能以及有事，操作員一定要盡可能的掌握其職業技能，在不同的作業環境發揮出的優勢體現。

Secondly, in order to give full play to the working performance of the double steel wheel roller, the operators must master their professional skills as much as possible, and display their advantages in different working environments.

雙鋼輪壓路機作為一種性能比較突出的機械設備，在進行作業的時候，一定要盡可能的維護和保養，以方便其盡可能的為道路工程貢獻出作用，在后期不用的時候，要做好的保養措施，以便延長壓路機的使用壽命。

As a kind of mechanical equipment with outstanding performance, the double steel wheel roller must be maintained as much as possible during operation to facilitate its contribution to the road project as much as possible. When it is not used in the later period, comprehensive maintenance measures should be taken to extend the service life of the roller.

壓路機的操作說不上困難，但還是讓技術較強的人員來操作，如果有新手學習駕駛，一定要有老師傅親手提攜為好，這樣才能更大的發揮出它的優勢。關注我們http://www.mshjwlk.com，了解更多。

The operation of the road roller is not difficult, but it should be operated by skilled personnel. If there is a novice learning to drive, it is better to have the master hand-held, so as to give full play to its advantages. Follow us http://www.mshjwlk.com Yes, learn more.