冷再生的施工技術包含什么內容呢？這個問題是近來不少人會咨詢到的，為了讓大家更好的完成施工并有一個很好的施工質量，下面冷再生機租賃廠家為您講講。

What does the construction technology of cold regeneration include? Many people will ask this question recently. In order to let everyone better complete the construction and have a good construction quality, the following cold recycling machine rental manufacturer will tell you about it.

使用穩定就地冷再生技術進行道路維修的施工工藝流程是進行進行維修路段交通道路的封閉，然后進行施工放樣確保施工按照圖紙進行，將原道路進行清洗并準備好需要添加的原材料，準備好冷再生機組進行破碎和拌和，將混合料進行攤鋪碾壓，接縫和掉頭處進行處理，在接受檢查監督確認質量合格之后注意養生期間的保養，后就可以投入使用了。

The construction process of using the stable in place cold recycling technology for road maintenance is first to close the traffic road of the maintenance section, then to carry out the construction setting out to ensure that the construction is carried out according to the drawings, to clean the original road and prepare the raw materials to be added, to prepare the cold recycling unit for crushing and mixing, to pave and roll the mixture, and to conduct professional treatment at the joints and turns, After receiving inspection and supervision to confirm that the quality is qualified, pay attention to the maintenance during the curing period, and then it can be put into use.

冷再生技術進行施工前，需要許多的準備工作才能進行正式施工。準備工作完成的好壞，決定了之后施工結果的質量好壞，如下：

Before the construction of cold regeneration technology, a lot of preparatory work is required before formal construction. The quality of the subsequent construction results depends on the quality of the preparation work, as follows:

我們要對需要進行維修的破損路面進行取樣分析，取樣時要注意均勻取樣，盡量保證取樣點所分析出的數據符合道路的整體情況。在進行破舊路面的分析中應當測量出破損路面的水泥碎石各自含量，以及道路建設成功時所需要的抗壓強度和佳含水量。

We should take samples of the damaged pavement that needs to be repaired for analysis. When taking samples, we should pay attention to uniform sampling, and try to ensure that the data analyzed at the sampling points conform to the overall situation of the road. In the analysis of dilapidated pavement, the respective content of cement macadam of the damaged pavement, as well as the compressive strength and good water content required for successful road construction should be measured.

根據已經得出的破損路面的原材料比例選擇添加到再生材料中的新材料比例。新材料使用的水泥種類和碎石大小以及改變其性能的添加劑，都要按照前一部的準備工作進行配置，拌和時使用的水可以采取飲用水。

Select the proportion of new materials added to the recycled materials according to the proportion of raw materials of the damaged pavement. The type of cement and the size of crushed stone used for new materials, as well as the additives to change their performance, shall be configured according to the preparation of the previous part. Drinking water can be used for mixing.

我們準備冷再生技術施工所使用的機械，包括加工原材料的冷再生機、進行碾壓的膠輪壓路機、輔助養生的灑水車和其他推土機平地機，等等機械設備。

We prepare the machinery used in the construction of cold recycling technology, including cold recycling machines for processing raw materials, rubber tyred rollers for rolling, watering carts for auxiliary curing and other bulldozer graders, and other mechanical equipment.

要對這些機械設備進行檢查運行狀況，對有問題的設備要進行修理，避免出現已經開始施工，由于機械故障所導致的拖延施工時間的事件發生。更多相關內容就來我們網站http://www.mshjwlk.com咨詢吧！

Check the operation condition of these mechanical equipment, and repair the problematic equipment to avoid the occurrence of events that delay the construction time due to mechanical failures that have already started construction. More relevant content will come to our website http://www.mshjwlk.com Consult!