對于任何設備來說，想要保證設備的正常運行，是需要進行養護工作的，冷再生設備也同樣如此，不過該設備的養護有搶修與維修兩種情況，這兩種狀態有什么區別呢？下面就和冷再生機出租廠家一起來看一下吧。

For any equipment, it is necessary to carry out maintenance work to ensure the normal operation of the equipment, and so is the cold regeneration equipment. However, the maintenance of the equipment includes emergency repair and maintenance. What is the difference between the two states? Let's take a look at it with the cold regeneration machine rental manufacturer.

冷再生機施工時會產生均勻的較厚鋪層內，不存在傳統施工方法中出現的較薄鋪層間的薄弱界面。因其具備、等優點而受到廣大用戶的喜愛，同時也可以改善施工條件，減輕經濟壓力，是許多小型施工單位的選擇。

During the construction of the cold regenerator, there will be a uniform thick layer, and there will be no weak interface between the thin layers in the traditional construction method. Because of its advantages of environmental protection and energy conservation, it is popular with the majority of users, and can also improve construction conditions and reduce economic pressure, which is the choice of many small construction units.

維修的主要目的在于盡可能使設備保持良好的運行狀態，一旦有工作需要就可以立即進入工作的狀態。而且維修也是有既定的流程要求的，主要可以分為診斷、定位、隔離、修復校正等幾個步驟，而且都需要有一定技能的維修人員來完成。總的來說，維修其實更側重于是在工作間隙、在設備不工作的時候進行的。

The main purpose of maintenance is to keep the equipment in good working condition as much as possible, and it can be put into working condition as soon as necessary. Moreover, maintenance also has established process requirements, which can be divided into several steps, such as diagnosis, positioning, isolation, repair and correction, and all of which need skilled maintenance personnel to complete. In general, the maintenance is more focused on the working gap and when the equipment is not working.

而如果遇到了比較緊急的情況，再按照平時維修的標準和程序進行修復的話，就會花費很多的時間，會嚴重影響到施工的進度和工期，同時也會降低冷再生機的利用率，這時候我們就需要進行設備搶修工作，以達到讓設備快速恢復工作狀態，保證工程進度的目的。

However, in case of an emergency, it will take a lot of time to repair according to the usual maintenance standards and procedures, which will seriously affect the construction progress and duration, and will also reduce the utilization rate of the cold regeneration machine. At this time, we need to carry out the equipment repair work, so as to quickly restore the equipment to the working state and ensure the project progress.

以上是對于冷再生機的維修與搶修區別的簡單介紹，希望可以對您有所幫助。本公司是專門的道路施工設備生產廠家，在設備銷售的同時還提供設備的租賃服務，如果您有相關需要的話，可以致電我公司http://www.mshjwlk.com進行咨詢。

The above is a brief introduction of the difference between the maintenance and emergency repair of the cold regenerator. I hope it can help you. Our company is a specialized manufacturer of road construction equipment. It also provides equipment leasing services while selling equipment. If you have any relevant needs, you can call our company http://www.mshjwlk.com Consult.