冷再生機是一種率、多用途的施工機械。主要用于瀝青混凝土路面的銑刨以及添加瀝青、水等材料后的舊瀝青路面的再生。也可用于公路、城鄉道路、機場、碼頭、停車場等工程的基層、底層穩定土現場就地拌和作業。下面冷再生機出租廠家為您介紹下內容：

Cold regeneration machine is a high-efficiency and multi-purpose construction machinery. Mainly used for milling asphalt concrete pavement and the regeneration of old asphalt pavement after adding materials such as asphalt and water. It can also be used for on-site mixing of base and bottom stabilized soil in projects such as highways, urban and rural roads, airports, docks, parking lots, etc. The manufacturer of the cold regeneration machine rental will introduce the following content to you:

較之傳統的道路維修改造方法，道路就地冷再生工藝有著無可比擬的諸多優點。

Compared to traditional road maintenance and renovation methods, the on-site cold regeneration process of roads has many incomparable advantages.

1、成本低

1. Low cost

根據國外的施工資料介紹，與在舊鋪層上加鋪新料的方法相比，就地冷再生約可降低成本20%~46%。

According to foreign construction materials, compared to the method of adding new materials to the old pavement layer, on-site cold recycling can reduce costs by about 20% to 46%.

2、提高舊路等級

2. Raise the level of old roads

可以通過基層承載力的提高從根本上實現道路等級的提高，這對低等級公路尤其有特殊意義。

The improvement of road grade can be fundamentally achieved through the improvement of grassroots bearing capacity, which is of special significance for low-grade highways.

3、結構的完整性

3. Structural integrity

冷再生施工產生的均勻的較厚鋪層內，不存在傳統施工方法中有時出現的較薄鋪層間的薄弱界面。

There is no weak interface between the thinner layers that sometimes occurs in traditional construction methods within the uniform and thicker layers produced by cold regeneration construction.

4、不損壞路基

4. Not damaging the roadbed

由于冷再生施工為一次性作業方式，再生機組在暴露的路基上只通過一次。所以與傳統施工方法相比，對路基的損害較小。

Due to the one-time operation of cold regeneration construction, the regeneration unit only passes through the exposed roadbed once. So compared to traditional construction methods, the damage to the roadbed is relatively small.

5、節約材料

5. Material saving

所有舊鋪層材料全部就地利用，從而大大減少了新材料的用量，保護了資源。

All old paving materials are utilized on-site, greatly reducing the amount of new materials and protecting resources.

6、工期短

6. Short construction period

由于不存在舊料的運輸問題，不需要其他機械對舊料的靶松和破碎，不需要大塊材料的去除和專門破碎，更重要的是施工過程的一次性作業特點大大簡化了施工程序，從而節約了施工時間。

Due to the absence of transportation issues for old materials, there is no need for other machinery to target and crush old materials, and there is no need for the removal and specialized crushing of large blocks of materials. More importantly, the one-time operation characteristics of the construction process greatly simplify the construction process, thereby saving construction time.

7、保護環境

7. Protecting the environment

因為舊料的利用大大減少了新材料的開采量，也不存在舊料的運輸和堆放問題。從根本上滿足了環境保護的要求。還有什么事項隨時來咨詢我們http://www.mshjwlk.com！

Because the utilization of old materials greatly reduces the mining output of new materials, there is no problem of transportation and stacking of old materials. Fundamentally meeting the requirements of environmental protection. Feel free to consult us on any other matters http://www.mshjwlk.com !