大家常常會看到馬路邊建筑工人工程施工修路，修路先封道，經由擋土墻砌墻，石灰粉填方，排水溝修建，混凝土冷再生，水穩路面施工，瀝清冷再生，道路瀝清路面施工，邊坡綠化修復，后道路標線涂畫，一段距離就成功了。修路歷程時會使用一些的科學技術生產工藝，主要包括混凝土冷再生和瀝清冷再生，混凝土冷再造和瀝清冷再生主要有什么不同呢？今天冷再生機出租廠家就來和大家科普一下。

People often see construction workers on the roadside building and repairing roads. They first seal the road, then use retaining walls to build walls, fill with lime powder, construct drainage ditches, cold concrete recycling, water stabilized pavement construction, asphalt cold recycling, road asphalt pavement construction, slope greening repair, and later road markings painting. After a distance, they have successfully completed the project. During the road construction process, some advanced scientific and technological production processes are used, mainly including concrete cold recycling and asphalt cold recycling. What are the main differences between concrete cold recycling and asphalt cold recycling? Today, the rental manufacturer of the cold recycling machine will come to popularize science with everyone.

1.水泥冷再生

1. Cold regeneration of cement

混凝土冷再生靈活運用廢棄原材料，并按占比添加一定量的添加劑在自然環境溫度下就地持續地完成原材料的銑刨、粉碎、拌和、路面施工及夯實成形，進而修建出具備需要特性品質的新基層。

Cold recycling of concrete flexibly utilizes waste raw materials, and adds a certain amount of additives in proportion to continuously complete the milling, crushing, mixing, road construction, and compaction of raw materials on-site at natural environmental temperatures, thereby building a new base layer with the required characteristics and qualities.

與傳統式工程施工方式對比，混凝土冷再生低成本、率、性價比高，可降低環境污染。

Compared with traditional engineering construction methods, cold recycling of concrete has the advantages of low cost, high efficiency, and high cost-effectiveness, which can reduce environmental pollution.

2.瀝清冷再生

2. Cold regeneration of asphalt

瀝青道路冷再生將舊路銑刨、脫離所得的回收瀝青道路原材料，經粉碎篩分，抽提測量油石比、礦料級配構成及回收瀝清的性能參數后，按新的瀝清再造混和料配合比設計，適度添加一部分新骨料、水、乳化瀝青等，在常溫下標準下（不加熱）拌和新的瀝青道路原材料。冷再生技術性能夠降低成本10-20%左右，且生產率高。

Cold recycling of asphalt roads involves milling and separating the old roads to obtain recycled asphalt road raw materials. After crushing and screening, the asphalt to stone ratio, mineral aggregate gradation composition, and performance parameters of recycled asphalt are extracted and measured. The mixture is designed according to the new asphalt recycling mixture ratio, with a moderate addition of new bone materials, water, emulsified asphalt, etc., and the new asphalt road raw materials are mixed at room temperature (without heating). Cold regeneration technology can reduce costs by about 10-20% and has high productivity.

瀝清冷再生技術性推動了工業生產廢棄物的開發利用與再生能源的綜合利用，同時推動了原材料再造和能源取代等新技術應用、新技術新工藝的開發設計與科學研究。

The technology of asphalt cold recycling has promoted the development and utilization of industrial production waste and the comprehensive utilization of renewable energy, while also promoting the application of new technologies such as raw material recycling and energy substitution, as well as the development, design, and scientific research of new technologies and processes.

瀝青道路冷再生技術性的運用對維護綠色生態、綠色可持續性發展趨勢的環境效益更顯，對改進道路生態具備關鍵作用。更多相關事項就來我們網站http://www.mshjwlk.com咨詢！

The application of cold recycling technology in asphalt roads has more significant environmental benefits for maintaining green ecology and sustainable development trends, and plays a key role in improving road ecological and environmental protection. For more related matters, come to our website http://www.mshjwlk.com consulting service